RC Global Marketing, Ltd.

.
	ABRASIVE BLENDING RATIOS for LEADX® We recommend that the blended ratio of LEADX® to blasting media be 15% by weight or 15 pounds of LEADX® blended with 85 pounds of blasting media. In laboratory test it was found that 15% by weight of LEADX® to blasting abrasive was sufficient to reduce the leachable lead from 11.0 ppm to 1.3 ppm. If the lead content of the paint is sufficiently great, it may be necessary to increase the ratio of LEADX® to blast abrasive. The lead content of paint is not an indicator of leachable lead, different paints may have different types of lead and will exhibit different leachable characteristics. Increasing the ratio of LEADX® to abrasive will reduce the leachable lead, see test results. A patch test should be done to determine leachable ppm of lead and correct blend of LEADX® to achieve the best results in stabilization of lead-paint debris. See KTA-Tator test results for detailed testing information. Contact RC Global Marketing, Ltd. or local distributor for additional information. MSDS for LEADX® is available for viewing here. WARRANTY Product performance is affected by many factors, including method and conditions of application and use. User testing is ESSENTIAL to determine suitability of product for intended method of application and use. RC Global Marketing, Ltd.'s SOLE WARRANTY is that the product has been manufactured to specifications. No oral or written information or advice shall increase this warranty or create new warranties. RC Global Marketing, Ltd.'s  SOLE LIABILITY is to replace product proved defective. In no event shall RC Global Marketing, Ltd. be liable for any consequential, indirect, or other damages whether arising from negligence or otherwise.
To learn more about LEADX®, use our Contact Page or call 254-587-2445